Home
Contact
Site Map
HomeYour are here  Home Products Show |
Total 125 Products | 61 - 80
8P8C Crimping Tool - 6024
1: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
RJ45, J12, J11 Crimping Tool - 6026
1: The series tools are suitable for the connecting working for patch panels, modules and cables??nd so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Stripper and Impact Tool - 6028
1: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Stripper and Impact Tool - 6029
1: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
RJ45 Crimping Tool - 6030
1: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Type 468 Network Cable Tester - 6032
This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Type 258 Network Cable Tester - 6033
This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Type 248 Network Cable Tester - 6034
This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Clamp Module - 7001
1: Compatible with KRONE modules2: Contact design is based on the principle of airtight contacting3: Cover material: PBT / ABS...
10 Pairs Clamp Module, disconnection with slot - 7004
1: Compatible with KRONE modules2: Contact design is based on the principle of airtight contacting3: Cover material: PBT / ABS...
5 pairs Rotation Module - 7005
1: Insulation Resistance >= 50000 M©2: Dielectric Strength >= 500V(AC voltage,5 0 Hz for 1 minute), no spark-over and flying arc3: Contact resistance between conductor and reed: =< 5m©4: Cond...
Rotation Module, 10 pairs - 7006
1: Insulation Resistance >= 50000 M©2: Dielectric Strength >= 500V(AC voltage,5 0 Hz for 1 minute), no spark-over and flying arc3: Contact resistance between conductor and reed: =< 5m©4: Cond...
High Frequency Jumper Module - 7011(25 pairs)
1: 25 pairs high frequency jumper module design and manufacture according to ISO/IEC 11801 TIA/EIA-TSB-40.It comply T568A and T568B line permutation.2: IDC terminal, silvering reed,aviable cable diame...
Lightning Protector Unit - 7014
1. With 3P arrester (DC spark-over Voltage: 230V or 350V) 2.Specially designed in single unit for protecting lines individually. In case one of them burns out, it is easily replaceable without any dis...
Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next
8P8C Crimping Tool - 60241: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
RJ45, J12, J11 Crimping Tool - 60261: The series tools are suitable for the connecting working for patch panels, modules and cables??nd so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Stripper and Impact Tool - 60281: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Stripper and Impact Tool - 60291: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
RJ45 Crimping Tool - 60301: The series tools are suitable for the connecting working for patch panels, modules and cablesï¼Oand so on2: Parts are made of good quality 45# steel, dealed by heat treatment3: Handle is made of PC...
Type 468 Network Cable Tester - 6032This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Type 258 Network Cable Tester - 6033This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Type 248 Network Cable Tester - 6034This cable tester quickly performs tests by auto-scanning wire continuity. By using the attached remote terminator, users can easily test the cable both before and after the cables have been installed...
Network Tool Kit - 6035
Network Tool Kit - 6036
Clamp Module - 70011: Compatible with KRONE modules2: Contact design is based on the principle of airtight contacting3: Cover material: PBT / ABS...
10 Pairs Clamp Module, disconnection with slot - 70041: Compatible with KRONE modules2: Contact design is based on the principle of airtight contacting3: Cover material: PBT / ABS...
5 pairs Rotation Module - 70051: Insulation Resistance >= 50000 M©2: Dielectric Strength >= 500V(AC voltage,5 0 Hz for 1 minute), no spark-over and flying arc3: Contact resistance between conductor and reed: =< 5m©4: Cond...
Rotation Module, 10 pairs - 70061: Insulation Resistance >= 50000 M©2: Dielectric Strength >= 500V(AC voltage,5 0 Hz for 1 minute), no spark-over and flying arc3: Contact resistance between conductor and reed: =< 5m©4: Cond...
25 Pairs Double-wire Direct Module - 7009
25 Pairs Cable Connection Module - 7010
High Frequency Jumper Module - 7011(25 pairs)1: 25 pairs high frequency jumper module design and manufacture according to ISO/IEC 11801 TIA/EIA-TSB-40.It comply T568A and T568B line permutation.2: IDC terminal, silvering reed,aviable cable diame...
3 Pole Gas Arrestor - 7012
Protector Module - 7013
Lightning Protector Unit - 70141. With 3P arrester (DC spark-over Voltage: 230V or 350V) 2.Specially designed in single unit for protecting lines individually. In case one of them burns out, it is easily replaceable without any dis...
Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next
| Products Category |
- Crimping Tools (5)
- Impact Tools (4)
- Insertion Tools (6)
- Network Cable Tester (3)
- Network Tool Kit (2)
- Stripper Tools (3)
- Fiber Optic Adaptors (7)
- Fiber Optic Patch Cords (2)
- Fiber Optic Patch Panel (6)
- Fiber Optic Splice Case (1)
- Fiber Optic Splice Closure (3)
| Contact Info |
|
Grand Telecommunication Equipment Co.,Ltd Tel: 0086-574-63973799 Fax: 0086-574-63973795 Key Contact: Mr. Grand Online Inquiry |
Chinese
English
German
Spanish
French
Italian
Portuguese
Japanese
Korean
Arabic
Russian
By SupplierList.com